LC Series Lift & Pour Series Induction Furnace
The LC Lift and Pour series is our bench-mark induction melting furnace for larger volume high speed melting. Ideal for melting gold, silver, copper, brass and aluminum and high temperature low grade scrap, such as Dental scrap. The LC series induction melter has the highest output efficiency rating in the industry. It is highly flexible, where a customer can purchase a 10 or 12kg machine and purchase a smaller induction coil that can be installed in minutes for smaller batch melting.
These LC induction furnaces can be set up for processing up to 4, 6, 10 and 12 kg of gold using power supplies ranging from 5 to 12 kW of power for fast melt times. A full volume of gold will melt is approximately 10 minutes and the volumes for silver and copper will be less than the gold volume.
In side by side testing with other leading melters in the world market we have found that output power ratings and efficiencies can be misleading. A buyer would feel that if they are purchasing a 10 kW melter they should be getting essentially the same performance from any similarly rated melter they purchase. This, unfortunately, could not be further from the truth and happy to say that the LC induction furnace gets to temperature faster and gets hotter than every leading system we have tested against. The output efficiency of the LC circuit can be the difference in melting success when smelting mined materials, low grade scrap, such as dental scrap, and bench sweeps, which require higher temperatures for successful melting. This is not a claim, it is a fact based on extensive testing and have complete confidence that the purchase of an LC lift and pour induction melting furnace would provide the buyer the best, most efficient induction melter in the world market today.
LC Lift & Pour Bench Top Melter Features
- Compact Bench Top or Floor Mount System
- Systems are Micro-Processor controlled
- Easy and Quiet operation
- Highly Efficient IGBT based solid-state generator
- Digital Power Adjustment
- Steel Frame Construction
- Limit & Failure Diagnostics
- Furnace section completely isolated from electronics
Melter Specifications
| MODEL | LC4 | LC6 | LC10 | LC12 |
|---|---|---|---|---|
| Power Supply | 5kW | 8kW | 10kW | 12kW |
| Crucible Capacity | 4kg Au – 18K 2.6kg Au-0.925 | 6kg Au – 18K 4kg Au-0.925 | 10kg Au – 18K 7kg Au-0.925 | 12kg Au – 18K 8kg Au-0.925 |
| Incoming Supply | 220V, 3-Phase 50-60Hz | 220V, 3-Phase 50-60Hz | 220V, 3-Phase 50-60Hz | 220V, 3-Phase 50-60Hz |
| Dimensions (inches) (WxDxH) |
28.25” x 18.50” x 17” | 28.25” x 18.50” x 17” | 28.25” x 18.50” x 17” | 28.25” x 18.50” x 17” |
| Weight | 100lbs | 100lbs | 100lbs | 100lbs |
| Water Cooling | Systems require water cooling | Systems require water cooling | Systems require water cooling | Systems require water cooling |
| Request A Quote | Request A Quote | Request A Quote | Request A Quote |