CS Series Centrifugal Casting Systems

CS3_Series for Jewelry CastingThe CS Casting Series casts all metals and alloys both precious and non-precious.  The CS1 and CS2 systems are primarily used in the Jewelry Industry for casting Platinum and Palladium, but are also used in industry for casting small parts in steel, copper and brass.  The CS3 is primarily used for casting Steel parts.  This system is a new heavy duty-melting generator that provides high efficiency.  You will have a higher degree of controllability and increased repeatability, resulting in increased productivity.  This user-friendly system is easy to install and simple to operate.  The CS series is very reliable, easy to maintain and service.

Features

  • Easy to use digital Control PanelCasting Process for Jewelry
  • Temperature reader with advanced thermo regulator
  • Metal Emissivity Regulation
  • Vacuum-Argon Washing cycle for casting Palladium and stone in place casting
  • Automatic Vacuum release
  • Advanced diagnostic features and error messages
  • 20 user programs with 10 programmable parameters each
  • Optional water cooling of the casting chamber
  • All systems can melt and cast Gold, Silver, Copper, Platinum, Palladium, Steel/CrCo

System Specifications

ModelCS1CS2CS3
Absorbed Power 7.5 kW 7.5 kW 10 kW
Medium Frequency melting circuit 30-60 Khz 30-60 Khz 30-60 Khz
Power Supply 220/230V – 3Phase 380V – 3Phase 220/230V – 3Phase 380V – 3Phase 220/230V – 3Phase 380/400V – 3Phase
Max Crucible Capacity 350g Pt 350g Pt 1.0kg Steel
Flask Size, mm (max) D=100 x H=120 D=120 x H=160 D=150 x H=180
Max Melting, T° 2000 C° 2000 C° 2000 C°
Cooling System Water Water Water
Weight (kg) 375 lbs (170) 441 lbs (200) 595 lbs (270)
Dimensions, inch (cm) LxWxH 29.9 x 23.6 x 39.3
(76 x 60 x 100)
39.4 x 32.7 x 42.5
(90 x 75 x 100)
42.5 x 35.4 x 43.3
(110 x 90 x 110)

Click here to Contact Us or call us at 908.835.7222